3-75
3
PIN Lockout Cycles
Log In > Configuration Menu > Edit Configuration > User Authentication
This feature is not applicable to TR250 Series equipment at this time.
PIN Minimum Length
Log In > Configuration Menu > Edit Configuration > User Authentication
Can be set between 1 - 99
POS ID
Log In > Configuration Menu > Manage Users > Modify User > (Select User)
The POS ID can be entered from this menu.
POS Interface
Log In > Configuration Menu > Edit Configuration > POS Interface
This function and it’s sub menus do not apply to TR250 Series equipment at this time.
X IBM POS Monitoring (T/F)
X Primary/Secondary IP Address
X Primary/Secondary Port
X Acknowledge Retry Timeout
(1-9999999 milliseconds)
X Send Deposit Emptied (T/F)
X Send User Info Transaction (T//F)
X Send Message Length (T/F)
X Send Accounting Period (T/F)
Prepare Deposit (operation)
Log In > Status > Note Recycler > Prepare Deposit
Preparing a deposit will cause the Note Recycler to move notes from the Recycle Cassettes to
the Deposit Cassette in order to achieve the “Static Balance” amount in the TR Series.
When a Static Balance is enabled:
The “Static Balance” is the amount that should remain in the TR Series after the Courier has
performed a pickup.
The STATIC BALANCE includes the amounts in the Coin Handler, however, only notes will be
transferred to the Deposit Cassette - No coins will be dispensed.
Notes existing in the Reject Cassette will not be moved to the Deposit Cassette - rejected notes
must be manually removed.
When a Static Balance is NOT enabled:
The User will be prompted to enter the amounts and currencies that should be moved to the
Deposit Cassette.
Prepare Deposit (permission)
Log In > Configuration Menu > Edit Groups, Mixes, etc > Permission Groups > (Select Group)
Users linked to a Group with this ability can move notes from the Recycle Cassettes to the Deposit
Cassette.
Print Odometers Report
Log In > Maintenance Menu
The Preventive Maintenance counters for the Coin and Note Recycling devices will be printed
To Next Page
Loading...