Tidel TR303 - Note Recycler ~ General Information

11-2
11
Note Recycler ~ General Information
The Tidel Note Handler is equipped with a Fujitsu G750L Note Recycler.
The Note Recycler is powered by +24 VDC which comes directly from the lower terminal on the Power
Supply chassis (inside the Electronics Bay).
The incoming VDC power cable connects to terminal CN1 on the Note Recycler Power Distribution PCB.
Power Distribution PCB
Lower Component PCB
Interface PCB
Note Recycler
Computer Front Connections
Note Recycler Connections
+24 VDC Power Supply
Connection Pin Out
The Note Recycler Data cable (from the Control Computer), connects to the USB terminal on the Note
Recycler Interface PCB.