3-84
3
Show Clerk Cash Operation Automations
Log In > Configuration Menu > Edit Configuration > User Interface Options Menu
When enabled, the Display will show operational videos when functions are selected by the User.
Show Timer on Courier Delay window (T/F)
Log In > Configuration Menu > Edit Configuration > Courier Options
Applies to units with a Courier Time Delay enabled for door opening procedures.
ENABLED:
When the Courier performs any door opening procedures, the door opening delay timer will be
displayed.
When the delay period has elapsed, the Courier will be prompted to open the door.
DISABLED:
When a door opening procedure is performed, a message “The Courier The unit has a time delay
configured, please wait for the time delay to expire” will be displayed.
When the delay period has elapsed, the Courier will be prompted to open the door.
Site 1/2
Log In > Configuration Menu > Edit Configuration > Network Reports
This menu contains entries for FTP file transfer processes
X Site 1/2
Report type
TX Periodic -
Daily Credit XML -
Enable (T/F)
The selected report type will be transmitted at the designated intervals
Protocol
FTP or FTPS
IP/URL address
Passive (T/F)
If enabled, the Host establishes connection with the unit and defines which random
command ports will be used to transfer data.
User Name
FTP account name (if used)
Password
FTP account password (if used)
Last Periodic TX ID sent
Sorter Reset
Log In > Maintenance Menu
The Coin Sorter will be reset and the status will be displayed
To Next Page
Loading...