Tidel TR303 - High Number of Rejected Coins

8-16
8
High number of rejected coins
1) Check the condition of the coins being rejected.
2) Open the Coin Sorter hood and inspect the feed wheel exit area for obstructions.
3) Perform cleaning routines.
4) Insure the Coin Drive Disk is seated properly (engages alignment pin).
5) Inspect the Coin Drive Disk fins for damage.
6) Inspect the Coin Sorting Plate for damage.
7) Check the Coin Exit Slots for blockage.
8) Check the positioning of the Coin Rail and rubber gasket.
Coin Sorter Troubleshooting