Tidel TR303 - Page 482

Printer Preventive Maintenance 12-3, 15-13
Printer prints nonsense 12-5, 15-15
Printer Troubleshooting 12-5, 15-15
Printer will not feed paper 12-8
Printer will not print 12-8
Printing is delayed 12-9
Printing stops intermittently 12-7, 15-17
Programming access 3-2
Programming and editing 2-9
Programming Levels 3-2
R
Rear Panel Connections 1-15
Recycle Cassettes 11-4, 11-7
Register Drawer ID Decals 2-8
Register Drawer Scanner 9
Registers 2-17
Reject Area 11-37, 14-47, 14-48, 14-49, 14-50, 11-38, 11-39, 11-
40, 11-41, 14-51
Reject Cassette 11-4, 11-9, 11-13
Reject Cassette
release lever 14-46, 11-37, 14-47
Reject Cassette
Release Lever 11-9, 11-13
Reject causes 11-48
Rejected coins 7-3, 8-16
Reject Frame
release lever 14-46, 11-38, 14-47
Reject Frame
Support Bar 14-46
Reject Frame
Support Bar release lever 14-46, 11-39, 14-49
Reject Missing 11-44
Remove Reject Cassette 11-9, 11-13
Restore From Backup 5-4, 15-6
RIGHT SIDE Power Supply 6-7
S
Screen Protector and Touchscreen 5-31
Sensors 6-14, 5-25, 5-26, 6-11, 6-14, 6-15, 6-8
Sensors and Solenoids 5-25, 5-26, 6-11, 6-14, 6-15
Sensor status 5-25, 5-27, 5-28, 6-11
Sensors/Vaults Do Not Appear in the Maintenance Menu 5-29
Sensor test 5-25, 6-11
Serial number 8
Serial Number Information 3, 4, 5, 6, 7
Shut Down Computer 8, 5-2, 15-5, 14-2
Shutter Door 14-28
Shutter Door track
Shutter Failure 4-9, 11-44
Single Solenoid will not activate 5-30
Solenoid diagnostics 5-27
Solenoid Plunger 6-10, 5-24, 6-10
SolenoidPosition Sensor 5-24
Solenoids 5-24, 6-10
Solenoid test 5-26, 6-15
Specications - Sentinel 1-2, 1-3
Start Of Shi 2-47
Static Balance 11-4
Static IP 10-3
Storage Temperature range 1-4
System Status 2-50
T
Terms 3-2
ermal Breaker 5-19
ermal paper 12-3, 15-12
Till Check In/Out Operation Setup 2-12
Till Drawer Tag 5-18, 14-25
Till Tag Reader 14-25
Tools Required 8, 14-2
Top Cover Sensor 13
To test a Sensor 6-10
Touchscreen Calibration 5-31
Touchscreen connection 5-31
Touchscreen/Display Assembly 5-31
Touchscreen is unresponsive 5-32
Touchscreen Replacement 5-31
Touchscreen unresponsive 5-32
Troubleshooting - Bulk Coin Dispenser 7-21, 13-19
U
Unloading Cassettes 11-8
UPPER Power connector 5-20
Upper Transport Release Lever 1-11
USB Transmission Error 4-11, 11-45
User Groups 2-36
User Log In Options 2-28
User Settings 2-39
V
VAC input 6-4
VAC output to Coin Sorter 6-4
Vaults Do Not Appear in the Maintenance Menu 5-30
VDC Output 6-5
VDC Test Points 6-3
Vending problems 13-36
voltage adjustment 5-22, 6-8
Voltage Present LEDs 6-3
VPN 10-3
W
Wireless modem 10-2