Cisco ASR 9000 Series Command Reference Guide

Thu May 13 10:28:26.474 PDT
Controller T1 0/1/1/0/1/1
Syslog Monitoring type State Thresholds (lcv/pcv/duration)
--------------------------------------------------------------------
enabled minor-warning stable Set( 15/ 15/ 4) Clear( 15/ 15/ 4)
major-warning stable Set( 154/ 145/ 4) Clear( 154/ 145/ 4)
The following example shows sample output from the show controllers t1 lnm command with the event
keyword for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/1/1/0/1/1 lnm event
Thu May 13 10:28:26.474 PDT
Controller T1 0/1/1/0/1/1
Last Five Events
--------------------------------------------------------------------
MINWARNCROSS: Noise crossed minor-warn threshold at Thu May 13 09:54:10 2010
MAJWARNCROSS: Noise crossed major-warn threshold at Thu May 13 09:54:11 2010
MAJWARNCLEAR: Noise cleared major-warn threshold at Thu May 13 10:27:25 2010
MINWARNCLEAR: Noise cleared minor-warn threshold at Thu May 13 10:28:14 2010
The following example shows sample output from the show controllers t1 lnm command with the statistics
keyword for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/1/1/0/1/1 lnm statistics
Thu May 13 10:28:26.474 PDT
Controller T1 0/1/1/0/1/1
Monitoring type Minor-Warn Major-Warn
--------------- ------------ ------------
Create 1 1
Update 0 0
Delete 0 0
Clear 0 0
Noise Crossed 1 1
Noise Cleared 1 1
Related Commands
DescriptionCommand
Clears link noise monitoring states or statistics.clear controller lnm, on page 959
Enables link noise monitoring and specifies thresholds
for noise errors on T1/E1 links that are used to signal
major warning events and recovery from those events.
lnm major-warning, on page 1012
Enables link noise monitoring and specifies thresholds
for noise errors on T1/E1 links that are used to signal
minor warning events and recovery from those events.
lnm minor-warning, on page 1015
Displays the contents of the logging buffer.show logging
Displays messages in the logging events buffer.show logging events buffer
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1044
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
show controllers lnm

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model