EasyManuals Logo

Cisco ASR 9000 Series Command Reference Guide

Cisco ASR 9000 Series
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1069 background imageLoading...
Page #1069 background image
DescriptionField
Values of the following alarm soaking intervals:
•
Alarm declarings: amount of time, in
milliseconds, after which an alarm is declared.
•
Alarm clearing: amount of time, in milliseconds,
after which an alarm is cleared.
Alarm Soaking Interval
Indicates controller port on which BERT test can be
run.
Bert Test on controller port
Indicates the current state of the test. Can be one of
the following:
• running— BER test is still in progress.
• done—BER test is complete.
• not running—BER test is not running on the
controller.
BERT test result
Indicates the test pattern you selected for the test.Test Pattern
Indicates the current synchronization state (sync).Status
Indicates the number of times synchronization has
been detected during this test.
Sync Detected
Indicates the length of the test.Interval
Indicates the time remaining for the test to run.
If you terminate a BER test, you receive a
message similar to the following: Time
Remain : 2 minute(s) (unable to complete)
"(Unable to complete)" signifies that you
interrupted the test.
Note
Time Remain
Bit errors that have been detected since the test
started.
Bit Errors (since BERT started)
Total number of test bits that have been received since
the test started.
Bits Received (since BERT started)
Bit errors that have been detected since the
synchronization started.
Bit Errors (since last sync)
Total number of test bits that have been received since
the synchronization started.
Bits Received (since last sync)
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1049
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
show controllers t1

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals