Cisco ASR 9000 Series Command Reference Guide

The following example shows sample output from the show controllers t1 command for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/4/2/0/1
T1 0/4/2/0/1 is up
mode: ATM
timeslots: 1-24
FDL per AT&T 54016 spec.
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Clock Source is internal
Data in current interval (38 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
Data in Interval 1:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
Data in Interval 2:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
.
.
.
The following example shows sample output from the show controllers t1 command with the tabular keyword
for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/4/2/0/1 tabular
T1 0/4/2/0/1 is up
mode: ATM
timeslots: 1-24
FDL per AT&T 54016 spec.
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Clock Source is internal
INTERVAL LCV PCV CSS SEFS LES DM ES BES SES UAS SSS
08:30-08:35 0 0 0 0 0 0 0 0 0 0 0
08:15-08:30 0 0 0 0 0 0 0 0 0 0 0
08:00-08:15 0 0 0 0 0 0 0 0 0 0 0
07:45-08:00 0 0 0 0 0 0 0 0 0 0 0
07:30-07:45 0 0 0 0 0 0 0 0 0 0 0
07:15-07:30 0 0 0 0 0 0 0 0 0 0 0
07:00-07:15 0 0 0 0 0 0 0 0 0 0 0
06:45-07:00 0 0 0 0 0 0 0 0 0 0 0
06:30-06:45 0 0 0 0 0 0 0 0 0 0 0
06:15-06:30 0 0 0 0 0 0 0 0 0 0 0
06:00-06:15 0 0 0 0 0 0 0 0 0 0 0
05:45-06:00 0 0 0 0 0 0 0 0 0 0 0
05:30-05:45 0 0 0 0 0 0 0 0 0 0 0
05:15-05:30 0 0 0 0 0 0 0 0 0 0 0
.
.
.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1050
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
show controllers t1

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model