unloaded, it will not appear in the log. When the log file reaches its maximum
size, old information is deleted as new information is added. This may affect the
amount of available historical data.
The log provides the following information:
v Volser — Media cartridge barcode label
v SN — Media cartridge serial number
v Mfr — Media cartridge manufacturer
v Date — Media cartridge manufacturing date (format: YYYYMMDD)
v Type — Media type
v Mounts — Cartridge mount count
v RRE — Recovered read errors
v URE — Unrecovered read errors
v RWE — Recovered write errors
v UWE — Unrecovered write errors
v LW — Cartridge lifetime MB written
v LR — Cartridge lifetime MB read
v Enc — Cartridge encryption status (U=Unknown, E=Encrypted, N=Not
Encrypted
Using Advanced Reporting Templates:
If you want to use the same configuration to create reports repeatedly, you can
save the configuration as a template. You can save up to 20 templates for each type
of advanced report.
To create a template:
1. From the remote UI, go to Monitor System → Advanced Reporting and select
the Advanced Reporting Configuration page, either Drive Utilization or Media
Integrity.
2. On the Advanced Reporting Configuration page, make the selections you want.
3. Type a name for the template in the empty field next to the Save button. The
name can have a maximum of 15 characters. You can use only lowercase letters,
numbers, and the underscore character (_) in template names.
4. Click Save.
The report appears in the drop-down list in the Report Templates box.
To use a saved template, select the template from the drop-down list in the Report
Templates box and click Load.
To delete a template, select the template from the drop-down list in the Report
Templates box and click Delete.
Advanced Report Configuration:
To perform Advanced Report Configuration, from the remote UI, go to Monitor
System → Advanced Reporting and select the Advanced Reporting Configuration
page, either Drive Utilization or Media Integrity. When you first open the
Advanced Reporting Configuration page, the system loads all the data from the
Chapter 2. Product Description 2-17
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To Next Page
Loading...
