14-22
14
Coin Sorter Cleaning
#8 - Gently clean fins with a soft brush/tootbrush and water
DRY COMPLETELY
(D) Coin Drive Disk
1) Remove the Coin Drive Disk CAP from the center post
2) Place the Coin Drive Disk back onto the sorter plate (ensure the keyed hole engages the pin
near the center post) and secure it with the Coin Drive Disk CAP.
3) Wrap the Coin Drive Disk Cap Retainer Band CCW and secure it to one of the tabs on the cap.
4) Return the “kickstand” to the storage position and lower the Coin Sorter Hood.
(E) Coin Sorter Closing
To Next Page
Loading...
