14-56
14
Functional Verification
I-Key Reader
1) Navigate to the Maintenance Menu:
Log In > Maintenance Menu > i-button reader diagnostics
The i-button checksum should be displayed
NFC Reader (Register Tray Tag Reader)
1) Navigate to the NFC Reader Test Menu:
Log In > Maintenance Menu > NFC Reader Diagnostic
2) When prompted, place a Data Code Tag in front of the NFC Reader.
The code/data of the tag should be displayed
Note Recycler
1) Navigate to the Note Recycler Menu.
Log In > Status (bottom tool bar) > Note Recycler
2) The Clear Jams/Errors selection should be subdued
If not, select “Clear Jams/Errors” and follow the appropriate prompts for resolution.
Printer
1) Insure paper is loaded in the Printer.
2) Navigate to the Printer Maintenance Menu:
Log In > Maintenance Menu > Printer Reset
The display should indicate a “Ready” status.
3) Select “Test Printer” - the Printer should print a “test page”.
To Next Page
Loading...
