Cisco ASR 9000 Series Command Reference Guide

DescriptionField
Rx J1 trace buffer received from the far end. If the
received data is valid it will be shown below the
PATH TRACE BUFFER field.
PATH TRACE BUFFER
Byte string containing the IP address of the remote
end of this connection. If the received data is invalid,
this field displays no IP address.
Remote IP addr
BER threshold values of the specified alarms for a
the 10-Gigabit Ethernet controller.
BER thresholds
TCA threshold values of the specified alarms for a
the 10-Gigabit Ethernet controller.
TCA thresholds
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1111
10-Gigabit Ethernet WAN PHY Controller Commandson the Cisco ASR 9000 Series Router
show controllers wanphy

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model