Cisco Small Business 200 Series

Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 102
2
Default
No summertime recurring offset is configured.
Command Modes
Global Config
Examples
The following example configures a recurring summertime date starting on the
Sunday in the fourth week of March, at 2:00 A.M, with an offset of 1 hour, ending on
Sunday in the fourth week of November at 2:00 A.M. This example also names this
timezone EDT.
(Switch) (Config)#clock summer-time recurring 4 sun mar 02:00 4 sun nov 02:00 offset 60
zone EDT
Related Commands
clock timezone
Use this command to set the offset to Coordinated Universal Time (UTC). Use the
no form of the command to reset the time zone offset to 0.
clock timezone hours hours-offset [minutes minutes-offset] [zone acronym]
no clock timezone
Syntax Descriptions
Command Description
clock summer-
time
Enables daylight savings time (DST).
clock
summertime date
Sets the summertime offset to UTC.
show clock Displays the time and date from the system clock.
Parameter Description
hours-offset The number of hours earlier or later Greenwich Mean Time.
The range is –12 to +13.