Cisco Small Business 200 Series - Show Classofservice Ip-Precedence-Mapping

Quality of Service
Class of Service Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 385
9
14(af13) 1
15 1
16(cs2) 2
17 2
18(af21) 2
19 2
--More-- or (q)uit
Related Commands
show classofservice ip-precedence-mapping
Use this command to display the global IP Precedence mapping to internal traffic
classes or the mappings for a specific interface.
show classofservice ip-precedence-mapping [interface]
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following command displays the global IP precedence mappings.
(switch) #show classofservice ip-precedence-mapping
IP Precedence Traffic Class
------------- -------------
03
11
22
34
45
Command Description
classofservice ip-
dscp-mapping
Maps an IP DSCP value to an internal traffic class.
Parameter Description
interface The port number. If specified, the IP Precedence mapping
table of the interface is displayed. If omitted, the most
recent global configuration settings are displayed.