Cisco Small Business 200 Series

Administration
RMON
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 163
2
Related Commands
show rmon alarm-table
Use this command in Privileged EXEC mode to display the alarms summary table.
show rmon alarm-table
Command Modes
Privileged Exec
Startup Alarm The alarm that might be sent when this entry is first set. If
the first sample is greater than or equal to the rising
threshold, and startup alarm is equal to rising or rising and
falling, then a single rising alarm is generated. If the first
sample is less than or equal to the falling threshold, and
startup alarm is equal falling or rising and falling, then a
single falling alarm is generated.
Rising
Threshold
A sampled statistic threshold. When the current sampled
value is greater than or equal to this threshold, and the value
at the last sampling interval is less than this threshold, a
single event is generated.
Falling
Threshold
A sampled statistic threshold. When the current sampled
value is less than or equal to this threshold, and the value at
the last sampling interval is greater than this threshold, a
single event is generated.
Rising Event The event index used when a rising threshold is crossed.
Falling Event The event index used when a falling threshold is crossed.
Owner The entity that configured this entry.
Command Description
rmon alarm Configures alarm conditions.