Cisco Small Business 200 Series

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 334
8
Related Commands
radius server retransmit
Use this command to globally configure the number of unsuccessful transmissions
of RADIUS messages that the client must make before it attempts to use the fall
back server.
Use the no form of this command to set the value of this global parameter to the
default value.
radius server retransmit retries
no radius server retransmit
Syntax Descriptions
Default
retries—3
Command Modes
Global Config
Command Description
radius server host Configures the IP address or DNS name of a RADIUS
server.
show radius
servers
Displays summary data and details on RADIUS servers.
Parameter Description
retries The number of messages transmissions before attempting
to use the fall-back server. The range is 1–10.