Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 85
2
sshcon timeout
Use this command to set the SSH connection timeout value in minutes. A session
is active as long as the session has not been idle for the value set. Use the no form
of this command to reset the timeout to the default.
sshcon timeout 1-160
no sshcon timeout
Syntax Descriptions
Default
timeout—10 minutes
Command Modes
Privileged Exec
Usage Guidelines
When the timeout value is changed, the new value is applied to all active and
inactive sessions immediately. Any sessions that have been idle longer than the
new timeout value are disconnected immediately.
Related Commands
sshcon timeout Configures the SSH Login Inactivity Timeout in minutes.
show ip ssh Shows SSH configuration information.
Parameter Description
1-160 The timeout value in minutes.
Command Description
ip ssh server
enable
Enables management access through SSH.
ip ssh protocol Sets or removes protocol levels (versions) for SSH.
Command Description