Cisco Small Business 200 Series

VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 229
4
Related Commands
lldp med confignotification
Use this command to configure a port to send the topology change notifications.
Use the no form of the command to disable notifications.
lldp med confignotification
no lldp med confignotification
Default
The sending of topology change notifications is disabled on all interfaces.
Command Modes
Interface Config
Related Commands
lldp med confignotification all
Use this command to configure all ports to send topology change notifications.
Use the no form of the command to disable notifications.
lldp med confignotification
no lldp med confignotification
Command Description
lldp med Enables LLDP-MED on an interface.
show lldp med Displays a summary of the current LLDP-MED
configuration.
Command Description
lldp med
confignotification
all
Configures all ports to send the topology change
notification.
show lldp med Displays a summary of the current LLDP-MED
configuration.