Cisco Small Business 200 Series

Quality of Service
Rate Limit Profile Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 373
9
rate-limit profile (Interface)
Use this command to apply the profile on a port.
rate-limit profile profile-id
Syntax Descriptions
Command Modes
Interface Config
Examples
The following command applies rate limit profile 1 to port e15:
(switch) (Interface e15)#rate-limit profile 1
Related Commands
show rate-limit
Use this command to display the rate limiting profiles on a port.
show rate-limit Interface {interface}
Parameter Description
profile-id The rate profile ID number.
Command Description
rate-limit profile
(Global)
Creates rate limit profile.
show rate-limit
profile
Displays parameters configured in a profile.
show rate-limit
interface
Displays the rate limiting profiles on the port.