Cisco Small Business 200 Series

IP Configuration
IP Addresses
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 391
10
dhcp client vendor-id-option-string
Use this command to set the vendor ID option string for use as option-60 in DHCP
client packets sent by the switch. Use the no option to delete the vendor ID option
string.
dhcp client vendor-id-option-string string
no dhcp client vendor-id-option string
Syntax Descriptions
Command Modes
Global Config
Related Commands
Parameter Description
string The vendor-option string to be included in DHCP packets.
Command Description
dhcp client
vendor-id-option
Enables the DHCP Option-60 (vendor class option).
show dhcp client
vendor-id-option
Shows whether the switch sends the vendor ID option
string as option-60 in DHCP client packets and displays
the contents of the string.