Cisco Small Business 200 Series

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 200
3
This section describes the commands you use to configure link aggregation.
addport
This command adds a port to a LAG.
addport logical interface
Syntax Descriptions
Command Modes
Interface Config
Examples
The following command adds interface e5 to LAG ch1:
(Switch) (config)#interface e5
(Switch) (Interface e5)#addport ch1
Related Commands
deleteport (Interface Config)
This command deletes the port from the LAG. The interface is the logical interface
number of a configured LAG.
deleteport logical interface
Parameter Description
logical interface The LAG number that the port will be added to.
Command Description
deleteport
(Interface Config)
Deletes a port from a LAG.
deleteport (Global
Config)
Deletes all configured member ports from a LAG.
show port-
channel brief
Displays the static capability of all LAG interfaces on the
device and a summary of individual LAG interfaces.