Cisco Small Business 200 Series

Administration
System Software and Configuration Management
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 123
2
Syntax Descriptions
Default
The default hostname is: switch<last three bytes of switch MAC>. For example,
switch142E4E.
Command Modes
Global Config
Related Commands
set location
Use this command to set a string that identifies the location of the switch. Use the
no form of the command to remove the contact information.
set location location
no set location
Syntax Descriptions
Default
No location string is configured.
Parameter Description
hostname The hostname of the switch, from 1–64 characters.
Command Description
set location Sets the switch location string.
set contact Sets the name of a contact for the switch.
Parameter Description
location A description of the location of the switch, from 1–160
characters.