Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 151
2
show logging buffered
Use this command to display buffered in-memory logging information and log
entries.
show logging buffered
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show logging buffered
Buffered (In-Memory) Logging : enabled
Buffered Logging Wrapping Behavior : On
Buffered Log Count : 112
1995-11-
26 19:29:10 CRIT LOG[LOG]: log_server.c(1827) 2 %% Log service started
Buffered messages filtered : 111
Related Commands
show logging hosts
Use this command to display the configured syslog servers.
show logging hosts
Command Modes
Privileged Exec
Command Description
logging buffered
enable
Configures buffered logging on the switch.
logging buffered
severity
Configures the minimum severity level that log messages
must have to be sent to the buffered log.
clear logging
buffered
Clear messages from the in-memory logging buffer.