Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 280
5
show spanning-tree mst port summary
Use this command to display the settings of one or all ports within the specified
MST instance.
show spanning-tree mst port summary mstid {interface | all}
Syntax Descriptions
Command Modes
Privileged EXEC
spanning-tree
mst
Sets the Path Cost or Port Priority for the specified port
within the MST instances or for the common and internal
spanning tree.
show spanning-
tree mst port
summary
Displays the settings for one or all ports within the specified
MST instance.
show spanning-
tree mst
summary
Displays summary information about all MST instances in
the switch.
Parameter Description
mstid The multiple spanning tree instance ID. If you specify 0
(defined as the default CIST ID), the status summary
displays for one or all ports within the common and
internal spanning tree.
interface The interface ID.
all Shows summary information for all ports.
Command Description