Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 72
2
Management Access—General
network mgmt_vlan
Use this command to the configure management VLAN ID. Use the no form of the
command to reset it to the default value (VLAN 1).
network mgmt_vlan 1-4094
no network mgmt_vlan
Syntax Descriptions
Default
The default VLAN ID for management access is1.
Command Modes
Privileged EXEC
Related Commands
show network
Use this command to display configuration settings associated with the switch
management interface.
show network
Command Modes
Privileged Exec
Parameter Description
1-4094 The VLAN ID. Access to the management interfaces is
restricted to the specified VLAN.
Command Description
show network Displays configuration settings associated with the
switch's management interface.