Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 248
4
Default
The protocol-based VoIP profile is globally disabled.
Command Modes
Global Config
Related Commands
show auto-voip oui-based interface
Use this command to display the VoIP profile settings for the specified VoIP type
on an interface or on all switch interfaces.
show auto-voip oui-based interface {interface | all}
Syntax Descriptions
Command Modes
Privileged Exec
Command Description
auto-voip
protocol-based
Enables VoIP Profile on an interface.
show auto-voip
protocol-based
Displays the VoIP Profile settings on the interface or
interfaces of the switch.
show auto-voip
sessions
Displays the currently running Auto-VoIP sessions on an
interface or interfaces.
Parameter Description
interface Shows Auto VoIP information for the specified port.
all Shows Auto VoIP information for all ports.