Cisco Small Business 200 Series

Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 112
2
Syntax Descriptions
Default
No keys are trusted.
Command Modes
Global Config
Related Commands
sntp unicast client poll-interval
If the switch is configured as an SNTP unicast client, it polls the specified SNTP
servers to synchronize time settings at a regular interval. Use this command to set
the poll interval. Use the no form of the command to reset it to the default value.
sntp unicast client poll-interval poll-interval
no sntp unicast client poll-interval
Syntax Descriptions
Default
poll-interval—3
Command Modes
Global Config
Parameter Description
key-number The key number of the trusted SNTP server.
Command Description
sntp server Configures SNTP unicast servers.
Parameter Description
poll-interval A value from 3 to 16. This value is used as an exponent of 2
to calculate the poll interval in seconds.