Cisco Small Business 200 Series

VLAN Management
Media VLAN
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 252
4
Command Modes
Privileged Exec
Examples
The following example shows command output.
(switch) (Config)#exit
(switch) #show auto-voip sessions
Source IP Destination IP Source Port Destination Port Protocol
--------------- --------------- ----------- ---------------- --------
Related Commands
Media VLAN
This section describes the commands that configure the Media VLAN feature that
enables switch ports to carry voice, video, and signaling traffic with an assigned
priority value. Assigning different priorities to traffic enables separation of media
and data traffic coming into a port.
The switch uses the IP-DSCP or 802.1p value in packets from media devices to
assign this traffic to high priority queues.
media-vlan (Global Config)
Use this command to enable the Media-VLAN capability on the switch. Use the no
form of command to disable the Media-VLAN capability on the switch.
media-vlan
no media-vlan
Command Description
auto-voip
protocol-based
Enables the protocol-based VoIP Profile on an interface.
show auto-voip
protocol-based
Displays the VoIP Profile settings on the interface or
interfaces.