Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 243
4
auto-voip oui
Use this command to configure a new Organizationally Unique Identifier (OUI). Use
the no form of the command to delete the configured OUI.
auto-voip oui hh:hh:hh oui-desc description
no auto-voip oui oui
Syntax Descriptions
Command Modes
Global Config
Example
(switch) (Config)#auto-voip oui aa:bb:cc oui-desc signalTel
Related Commands
auto-voip oui-based
Use this command to enable the OUI-based VoIP Profile on an interface. Use the
no form of the command to disable the profile.
auto-voip oui-based
no auto-voip oui-based
Default
OUI-based VoIP is disabled on all interfaces.
Parameter Description
oui The identifier, specified as three hexadecimal pairs
separated by a colon.
oui-desc A text string that identifies the OUI.
Command Description
show auto-voip
oui-table
Shows all configured OUIs.