Cisco Small Business 200 Series

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 362
8
show dot1x clients
Use this command to display detailed information about the users who have
successfully authenticated on the system or on a specified port.
show dot1x clients {interface | all}
Syntax Descriptions
Command Modes
Privileged Exec
dot1x system-
auth-control
Enables 802.1X globally.
dot1x timeout
reauth-period
Sets the number of seconds between re-authentication
attempts.
dot1x timeout
server-timeout
Sets the time that the switch waits for a response from the
authentication server.
dot1x timeout
quiet-period
Sets the number of seconds that the switch remains in the
quiet state following a failed authentication exchange.
dot1x timeout
supp-timeout
Sets the time that the switch waits for a response before
retransmitting an Extensible Authentication Protocol (EAP)-
request frame to the client.
dot1x timeout
tx-period
Sets the number of seconds that the switch waits for a
response to an Extensible Authentication Protocol (EAP)-
request/identity frame from the client before resending the
request.
clear dot1x
statistics
Resets the 802.1x statistics for the specified port or for all
ports.
authentication
dot1x
Assigns the authentication list to use for 802.1x port
security.
Parameter Description
interface The port number.
all Displays information on all ports.