Cisco Small Business 200 Series

VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 235
4
Related Commands
lldp med transmit-tlv
Use this command to specify which optional Type Length Values (TLVs) in the
LLDP-MED set are transmitted in the Link Layer Discovery Protocol Data Units
(LLDPDUs). You can enter the command with no optional key words to include all
TLV types.
Use the no form of the command to remove the TLV. You can enter the command
without any key words to remove all TLV types.
lldp med transmit-tlv [capabilities][inventory][location][network-policy]
no lldp med transmit-tlv[capabilities][inventory][location][network-policy]
Syntax Descriptions
Default
The capabilities and network policy TLVs.
Command Description
lldp med location-
tlv co-ordinate
Sets the coordinate-based Location TLV, as defined by
RFC3825.
lldp med location-
tlv civic-addr
Sets the civic address-based Location TLV to specify the
location of the switch.
lldp med location-
tlv elin-addr
Sets the ELIN address-based Location TLV to specify the
emergency number.
show lldp med
location-tlv
Shows the details of the Location TLVs configured.
Parameter Description
Capabilities Transmit the LLDP-MED capabilities TLV.
Inventory Transmit the LLDP-MED inventory TLV.
Location Transmit the LLDP-MED location TLV.
network-policy Transmit the LLDP-MED network policy TLV.