Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 277
5
(Switch) #show spanning-tree brief
Bridge Priority................................ 32768
Bridge Identifier.............................. 80:00:00:11:88:2A:35:41
Bridge Max Age................................. 20
Bridge Max Hops................................ 20
Bridge Hello Time.............................. 2
Bridge Forward Delay........................... 15
Bridge Hold Time............................... 6
Related Commands
show spanning-tree interface
Use this command to display the settings and parameters for a specific switch
port within the common and internal spanning tree. The status of ports is per-
instance; therefore status is displayed via the show spanning-tree mst port
detailed command.
show spanning-tree interface interface
Syntax Descriptions
Command Modes
Privileged EXEC
Examples
The following shows sample output for a specific interface:
(switch) #show spanning-tree interface e1
Command Description
spanning-tree
priority
Configures the spanning-tree bridge priority.
show spanning-
tree
Displays spanning tree settings for the common and internal
spanning tree.
show spanning-
tree interface
Displays spanning tree settings and parameters for an
interface.
Parameter Description
interface The interface ID.