Cisco Small Business 200 Series

5
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 257
Spanning Tree Protocol
This chapter describes how to configure the spanning tree, rapid spanning tree,
and multiple spanning tree protocols.
spanning-tree
Use this command to enable the operation mode of spanning tree. To disable it,
use the no form of this command.
spanning tree
no spanning tree
Default
Spanning tree is globally enabled.
Command Modes
Global Config
Related Commands
Command Description
spanning-tree
port mode all
Enables the spanning tree administrative mode for all ports.
spanning-tree
port mode
Enables the spanning tree administrative mode on a specific
port.