Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 246
4
auto-voip oui-vlan
Use this command to configure the VLAN to be assigned to OUI-based VoIP traffic.
Use the no form of the command to reset the VLAN to the default (no VLAN).
auto-voip oui-priority priority
no auto-voip oui-priority
Syntax Descriptions
Default
The highest priority queue available in the system.
Command Modes
Global Config
Related Commands
auto-voip oui-vlan Configures the VLAN to be assigned to OUI-based VoIP
traffic.
show auto-voip
oui-based
Displays the VoIP Profile settings on the interface or
interfaces.
Parameter Description
priority A class of service priority level to assign to OUI-based
VoIP packets. The range is 0-7, with 0 being the highest
prioirity.
Command Description
auto-voip oui-
based
Enables the VoIP Profile on an interface.
auto-voip oui-
based all
Enables the VoIP Profile on all the interfaces of the switch.
Command Description