Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 260
5
spanning-tree bpdumigrationcheck
Use this command to force the specified port or all ports to transmit RST or MST
BPDUs. This can be used to test whether all legacy bridges on the LAN have been
removed.
spanning-tree bpdumigrationcheck [all | interface]
Command Modes
Global Config
Related Commands
spanning-tree bpdu flood
Use this command to allow flooding of BPDUs received on non-spanning tree
ports to all other non-spanning-tree ports on the interface. Use the no form of the
command to disable flooding.
spanning-tree bpdu flood
no spanning-tree bpdu flood
Default
BPDU flooding is enabled by default on all interfaces.
Command Modes
Interface Config
Related Commands
Command Description
show spanning-
tree
Displays spanning tree settings for the common and internal
spanning tree.
Command Description
spanning-tree
bpdufilter
Discards BPDUs received on the specified interface.