Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 251
4
Command Modes
Privileged Exec
Examples
The following example shows command output.
(switch) #show auto-voip protocol-based interface e1
Interface Auto VoIP Mode Traffic Class Port Status
--------- -------------- ------------- -----------
e1 Enabled 7 Up
Related Commands
show auto-voip sessions
Use this command to display the currently running protocol based Auto-VoIP
sessions on all switch interfaces.
show auto-voip sessions
all Shows Auto VoIP information for all ports.
AutoVoIP Mode The Auto VoIP mode on the interface.
Traffic Class The CoS Queue or Traffic Class to which all VoIP traffic is
mapped. This is not configurable and defaults to the highest
CoS queue available in the system for data traffic.
Port Status The operational status of the port.
Command Description
auto-voip
protocol-based
Enables the VoIP Profile on an interface.
auto-voip
protocol-based
all
Enables the VoIP Profile on all the interfaces of the switch.
show auto-voip
sessions
Displays the currently running Auto-VoIP sessions on an
interface or interfaces.
Parameter Description