Cisco Small Business 200 Series

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 201
3
Syntax Descriptions
Command Modes
Interface Config
Examples
The following command deletes interface e5 from LAG ch1.
(Switch) (config)#interface e5
(Switch) (Interface e5)#deleteport ch1
Related Commands
deleteport (Global Config)
This command deletes all configured member ports from the LAG. The all
parameter is only for completeness and pertains only to the members of the
specified LAG interface.
deleteport {logical interface} all
Syntax Descriptions
Parameter Description
logical interface The LAG number that the port will be deleted from.
Command Description
addport Adds a port to a LAG.
deleteport (Global
Config)
Deletes all configured member ports from a LAG.
show port-
channel brief
Displays the static capability of all LAG interfaces on the
device and a summary of individual LAG interfaces.
Parameter Description
logical interface The LAG number that the port will be deleted from.
all Specifies that all ports will be deleted from the LAG.