Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 152
2
Examples
The following shows sample output for the command.
(switch) #show logging hosts
Index IP Address/Hostname Severity Port Status
----- ------------------------ ---------- ------ -------------
1 yahoo.com critical 514 Active
Related Commands
show logging persistent
Use this command to display persistent logging information and log entries.
show logging persistent [startup | operational] [{0 | 1 | 2}]
Index An ID that is used for deleting hosts.
IP Address /
Hostname
IP address or hostname of the logging host.
Severity The minimum severity to log to the specified address. The
possible values are emergency (0), alert (1), critical (2), error
(3), warning (4), notice (5), info (6), or debug (7).
Port The server port number, which is the port on the local host
from which syslog messages are sent.
Status The state of logging to configured syslog hosts. If the status
is disable, no logging occurs.
Command Description
logging host Enables logging to a host (syslog server).
logging host
remove
Removes a syslog server.