Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 296
7
Syntax Descriptions
Command Modes
Global Config
Related Commands
set multicast filter-unregistered
Use this command to drop unregistered-multicast-addresses on a port in a VLAN.
Use the no form of this command to return to the default.
set multicast filter-unregistered {[vlan vlan-id] | all}
no set multicast filter-unregistered {
[vlan vlan-id]| all}
Syntax Descriptions
Parameter Description
mac-address The multicast MAC address, specified as a 6-byte
hexadecimal number in b1:b2:b3:b4:b5:b6 format.
ip-address An IPv4 address.
vlan-id A valid VLAN.
Command Description
macfilter adddest Adds the port to the destination filter set for the MAC filter
with the given MAC address or IP address and VLAN ID.
macfilter Adds a static filter entry with MAC-layer station source
address or IP Group Address.
show mac-
address-table
staticfiltering
Displays the Static Multicast Filtering entries in the
Multicast Forwarding Database (MFDB) table.
Parameter Description
vlan-id The ID of the VLAN to configure.