Cisco Small Business 200 Series

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 352
8
Related Commands
dot1x timeout reauth-period
Use this command to set the number of seconds between re-authentication
attempts. To return to the default setting, use the no form of this command.
dot1x timeout reauth-period seconds
no dot1x timeout reauth-period
Syntax Descriptions
Default
seconds—3600
Command Modes
Interface Config
Command Description
show dot1x Shows a summary of the global 802.1X configuration,
summary information of the 802.1X configuration for a
specified port or all ports, the detailed 802.1X
configuration for a specified port and the 802.1X statistics
for a specified port.
Parameter Description
seconds The time between re-authentication attempts. The range
is 300–65535 seconds.