Cisco Small Business 200 Series

SNMP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 424
11
Command Modes
Global Config
Related Commands
snmp trap link-status all
This command enables link status traps for all interfaces. Use the no form of the
command to disables link status traps for all interfaces.
snmp trap link-status all
no snmp trap link-status all
Command Modes
Global Config
Related Commands
snmp trap link-status
This command enables link status traps by interface. Use the no form of the
command to disables link status traps by interface.
snmp trap link-status
no snmp trap link-status
Default
Link status traps are enabled on all interfaces.
Command Modes
Interface Config
Command Description
snmp-server user Configures a new SNMP Version 3 user.
Command Description
snmp trap link-
status
Enables link status traps by interface.