Cisco Small Business 200 Series

VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 234
4
Related Commands
lldp med location-tlv type
Use this command to set the location TLV type to use in the LLDP-MED Location
TLV advertisement.
lldp med location-tlv type {ELIN | civic | coordinate}
Syntax Descriptions
Default
The default location TLV type is Civic.
Command Modes
Global Config
Command Description
lldp med location-
tlv co-ordinate
Sets the coordinate-based Location TLV, as defined by
RFC3825.
lldp med location-
tlv civic-addr
Sets the civic address-based Location TLV to specify the
location of the switch.
show lldp med
location-tlv
Shows the details of the Location TLVs configured.
Parameter Description
ELIN Emergency Location Identification Number of the switch.
civic Geographic description of the location, such as city, street
name, and building name.
coordinate GPS coordinates in hexadecimal format.