Cisco Small Business 200 Series

Administration
System Software and Configuration Management
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 126
2
show config-file
Use this command to display the contents of a configuration file.
show config-file config-file-name
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch443322) #show config-file backup-config
telnetcon timeout 50
configure
exit
vlan database
vlan 1000
exit
network mgmt_vlan 1000
ip http session soft-timeout 50
configure
logging console enable
logging persistent size 200
logging host ipv4 10.131.17.31 514 debug
logging syslog enable
username "cisco" password e9fdde45468372340d4bd849dda25f08c8b6099a4b66d32b31afb4
7750f98cb8648e53d50678a956d4d54930be63f3aa0af756f7194e9d4324e231b8bb7bd2e9 encrypted override-
complexity-check
username "okk" password c6fee9c4982b125bac5ee0a356e22f0b74702a0a64d82db20a4ae2c0
e9de84aa1c3976ab79382344135da1a5ba33c70f091bd224fe9a107c1cf701cd2619b6f9 encrypted override-
complexity-check
line console
serial timeout 50
exit
spanning-tree configuration name "00-66-55-44-33-22"
snmp-server enable
Parameter Description
config-file-name The name of the configuration file which can be:
• startup-config
• backup-config
• mirror-config