Cisco Small Business 200 Series

IP Configuration
IP Addresses
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 398
10
Defaults
• count—1
• interval—3 seconds
• size—0 bytes
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #ping yahoo.com count 3 interval 2 size 1024
Pinging yahoo.com with 1024 bytes of data:
Reply From 69.147.125.65: icmp_seq = 0. time= 260 msec.
Reply From 69.147.125.65: icmp_seq = 1. time= 260 msec.
Reply From 69.147.125.65: icmp_seq = 2. time= 260 msec.
----yahoo.com PING statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (msec) min/avg/max = 260/260/260
Related Commands
ping ipv6
Use this command to determine whether another computer is on the network. Ping
provides a synchronous response when initiated from the CLI and web interfaces.
ping ipv6 {ipv6-global-address | hostname | interface network link-local-address} {[size
datagram-size
]}
Syntax Descriptions
Command Description
ping ipv6 Determines whether another computer is on the network.
Parameter Description
ipv6-global-
address
Specifies and IPv6 global address of the interface to ping.