Cisco Small Business 200 Series

Port Management
Switch Ports
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 179
3
show interface advertise
Use this command to display the port autonegotiation status and the advertised
speeds for an individual port or all ports.
show interface advertise [ethernet interface]
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following command shows command output for all interfaces.
(switch) #show interface advertise
Port Type Neg Operational Link Advertisement
-------- ---------- --------- ------------------------------
e1 Enable 1000f, 100f, 100h, 10f, 10h
e2 Enable 1000f, 100f, 100h, 10f, 10h
e3 Enable 1000f, 100f, 100h, 10f, 10h
e4 Enable 1000f, 100f, 100h, 10f, 10h
e5 PC Mbr Enable 1000f, 100f, 100h, 10f, 10h
e6 PC Mbr Enable 1000f, 100f, 100h, 10f, 10h
e7 Mirror Disable
e8 Probe Enable 1000f, 100f, 100h, 10f, 10h
e9 Enable 1000f, 100f, 100h, 10f, 10h
e10 Enable 1000f, 100f, 100h, 10f, 10h
e11 Enable 1000f, 100f, 100h, 10f, 10h
e12 Enable 1000f, 100f, 100h, 10f, 10h
e13 Enable 1000f, 100f, 100h, 10f, 10h
e14 Enable 1000f, 100f, 100h, 10f, 10h
e15 Enable 1000f, 100f, 100h, 10f, 10h
e16 Mirror Enable 1000f, 100f, 100h, 10f, 10h
show port Displays port information.
Parameter Description
Ethernet Displays information for a specified port. If this parameter
is not specified, the command displays information for all
ports.
Command Description