Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 147
2
Command Modes
Global Config
Related Commands
logging syslog facility
Use this command to set the facility for logging messages. The meaning of the
facility value is determined by the system administrator. To reset to the default
value, use the no form of the command.
logging syslog facility facility
no logging syslog facility facility
Syntax Descriptions
Default
facility—local7
Command Modes
Global Config
Command Description
logging syslog
facility
Sets the facility for logging messages.
logging syslog
port
Specifies the logical port number for the syslog client on
the switch.
show logging Displays logging configuration information.
Parameter Description
facility A can take one of the follow values: local0, local1, local2,
local3, local4, local5, local 6, local7.