Cisco Small Business 200 Series

VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 241
4
Related Commands
show lldp med remote-device detail
Use this command to display detailed information about remote devices that
transmit current LLDP-MED data to an interface on the system.
show lldp med remote-device detail {interface | all}
Syntax Descriptions
Command Modes
Privileged Exec
Local Interface The interface that received the LLDPDU from the remote
device.
Remote ID An internal identifier to the switch to mark each remote
device to the system.
Chassis ID The ID that is sent by a remote device as part of the LLDP
message, it is usually a MAC address of the device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
Command Description
show lldp med
remote-device
detail
Displays detailed information about remote devices that
transmit current LLDP-MED data to an interface on the
system.
Parameter Description
interface The interface ID.
all Shows data for all remote LLDP devices.