Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 308
7
set igmp mrouter interface
Use this command to configure the interface as a multicast router interface. When
configured as a multicast router interface, the interface is treated as a multicast
router interface in all VLANs. Use the no form of the command to disable it.
set igmp mrouter interface
no set igmp mrouter interface
Default
IGMP mrouter is disabled on all interfaces.
Command Modes
Interface Config
Related Commands
show igmpsnooping
Use this command to display IGMP Snooping information. Configured information
is displayed whether or not IGMP Snooping is enabled.
show igmpsnooping vlan-id
Command Description
show
igmpsnooping
mrouter vlan
Displays information about static and dynamic multicast
router information on the port.
show
igmpsnooping
mrouter interface
Displays information about statically configured mrouter
ports.
show
igmpsnooping
Displays IGMP Snooping information. Configured
information is displayed whether or not IGMP Snooping is
enabled.