Cisco Small Business 200 Series

IP Configuration
IP Addresses
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 394
10
network ipv6 gateway
Use this command to configure IPv6 gateway (i.e., default routers) for the
management interface. Use the no form of the command to remove the IPv6
gateway.
network ipv6 gateway gateway-address
no network ipv6 gateway
Syntax Descriptions
Command Modes
Privileged Exec
Related Commands
network ipv6 neighbor
Use this command to add static IPv6 neighbor entry. Use the no form of the
command to delete a static entry.
network ipv6 neighbor ipv6-address mac-address
network ipv6 neighbor ipv6-address mac-address
Parameter Description
gateway-address The IPv6 default router address.
Command Description
network ipv6
address
Manually configures IPv6 global address.
show network Displays the configuration settings associated with the
switch management interface.