Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 250
4
Examples
The following example shows command output.
(switch) #show auto-voip oui-table
OUI Status Description
--------- ---------- ---------
00:01:E3 Default SIEMENS
00:03:6B Default CISCO1
00:12:43 Default CISCO2
00:0F:E2 Default H3C
00:60:B9 Default NITSUKO
00:D0:1E Default PINTEL
00:E0:75 Default VERILINK
00:E0:BB Default 3COM
00:04:0D Default AVAYA1
00:1B:4F Default AVAYA2
AA:BB:CC Configured signalTel
Related Commands
show auto-voip protocol-based interface
Use this command to display the profile-based VoIP settings for an interface or for
all switch interfaces.
show auto-voip protocol-based interface {interface | all}
Syntax Descriptions
Command Description
auto-voip oui Configures a new OUI.
show auto-voip
oui-based
interface
Displays the VoIP profile settings for the specified VoIP
type on an interface or on all switch interfaces.
show auto-voip
oui-based
interface
Displays the Auto VoIP configuration of an interface or all
interfaces.
Parameter Description
interface Shows Auto VoIP information for the specified port.